It is a bonded fabrics manufacturers commonly used material in decorative materials. Including chemical fiber carpets, non-woven wall cloth, linen cloth, nylon cloth, colored tape, flannel and other fabrics. Cloth plays a considerable role in the decoration and display, and is often the main force that cannot be ignored in the entire sales space. Extensive use of fabrics for wall decoration, partition, and background processing can also form a good commercial space display style. The bonding of cloth and other materials is mainly through the action of adhesive to bond cloth and other two materials with different properties. Then the bonding strength of cloth and other materials is mainly the same as that of the cloth material. The properties of the bonding agent are related to the bonding process. In the process of processing, it is necessary to select different properties of binders according to the performance requirements of the products to produce excellent products.
Pure acrylic latex, excellent outdoor weather resistance, light resistance, and yellowing resistance; single-component, easy to use, environmentally friendly and non-toxic; it has high initial adhesion and adhesion, while taking into account good cohesion under long-term high temperature environments; excellent The most important requirement for PVC and OPP substrate adhesive tapes is the anti-transfer performance, leaving no residual glue during transfer; the use of PVC or OPP film as the substrate coating meets the test, and the amount of dry glue applied is not less than 25 grams per square meter. The dry water-based laminating adhesive produced by this technology has low viscosity, high strength, high brightness, small dosage and low cost.
Approximately 5-7 grams of glue is used for each square meter of lamination) For paper products of various weights, it can be cut with the lamination without curling or warping. After various paper products are laminated, they can be indented and die-cut at any time, embossed with UV, glue-mounted, concave and convex, and frosted can achieve the desired effect. Glass card, white card, white board, copper plate, gray background white, rubber plate, metal ink, aluminum plating, embossing, all can be laminated with high quality. L-606 dry water-based laminating adhesive is an environmentally friendly product, water-based, non-toxic, non-polluting, non-flammable, non-explosive, and non-irritating to the skin.
Meet the requirements of human health. dry-type water-based laminating adhesive is an alternative to traditional oil-based laminating adhesive. It is odorless when used and has a superior working environment. dry-type water-based laminating adhesive is of high quality and excellent overall performance. The composite product can tear the ink, has good brightness, and can be embossed and crimped. No bubbles, good toughness, smooth and beautiful, high bonding strength, and will not open the glue when wet. Dry-type water-based laminating adhesive can be applied to hot stamping, gold printing, composite product rolling, rolling three-dimensional pattern is not affected, the pattern is realistic, the three-dimensional feeling is strong, and the color will never change.
